The alarm that matters is the one that goes off when the shop is shut, the cellar is between deliveries, or the only person on site is stacking a cage. The last full week of November is late for a first look at the plant. A cabinet, a cellar cooler or a cold room has stopped holding temperature, and someone has to decide about the product before an engineer is in the van.
EJM’s breakdown line is 01429 836 161, answered around the clock. How soon someone reaches the site depends on where it is, what the plant is, and how clearly the fault is described. This note is what to do while you wait. It is not a repair guide, and it is not a ruling on whether food is still safe to sell. That sits with the person responsible for the food, against their own plan.
Visits that make this call rarer are in our notes on retail cabinets and cellar cooling and on walk-in cold rooms through Christmas trading. Use those if the plant has not been looked at. Use this if the alarm has already started.
Write the time down before you touch anything
The useful record is dull. What time did the alarm start, or what time did someone notice the cabinet was quiet? What does the controller show? Are the fans turning? Is the case dark because a breaker has tripped, or lit and simply warm? Photograph the display before anyone presses buttons.
Do not cancel the alarm and walk away. A silenced beeper is how a Saturday fault becomes a Monday write-off. If the panel can mute the sound and still show the fault, use that. If the only way to stop the noise is to kill the power, leave the power on until the temperatures are written down.
Defrost is easy to mix up with a breakdown. A cabinet or cold room often warms for a short spell while the coil clears, then pulls back down. If someone knows the defrost clock, ask whether this is that window. If nobody knows, treat the alarm as real.
Decide about the product, then move it once
UK food hygiene rules generally require many chilled foods that can support bacterial growth to be kept at 8°C or below. The Food Standards Agency advises running fridges at 5°C or below. Those figures are background. They are not permission to keep selling until a probe hits a number, and they are not a promise that food under 8°C is fine after it has already been warmer. The site’s food safety plan says what happens when the temperature has risen, and for how long.
Frozen stock has more thermal mass than a serve-over of cooked meat. Warm cask ale is a quality problem of a different kind from a warm kitchen cold room. If you are unsure, stop selling or serving from the unit that has alarmed, and keep that product apart from anything you are still confident about.
Move stock only when another cabinet or room is cold and has space, and move it only once. Filling a small under-counter fridge with trays from a failed case warms the cabinet that was still working. Keep a failed cold room shut while you decide. A closed room stays colder for longer than one with the door wedged open so someone can look.
Cabinets, cellars and cold rooms fail differently
On an open cabinet, see whether the fans are running and whether Christmas stock is stacked across the return grille. A case can alarm because it cannot breathe, with the refrigeration still running. On an integral cabinet, check the plug and the local socket if you can do that without taking the case apart. Do not hose the coil, and do not pour warm water down the drain to clear it. Note any water on the floor. It is a slip hazard, and the engineer will want to know about it.
A cellar cooler is often a small split with the condenser in the yard. If the cellar is warm and the inside fans are still, look from the ground: leaves, packaging, or a cover left over the unit. Do not climb and do not remove panels. Say how long the door has been open and whether a delivery landed on top of the fault. Whoever is responsible for what you serve decides about the beer.
A walk-in or a distribution store is a larger mistake if the wrong switch is thrown. Leave plant-room breakers alone unless you are trained to operate them. Resetting a pack or anything on an ammonia plant you do not know can turn a temperature alarm into a damaged compressor. For those rooms the first hour is the product, the doors and the phone call. Cold store plant is on our cold storage and distribution page. Shop cabinets and cellars sit with commercial and retail.
What to have in your hand when you call
Have this ready before you dial:
- The address, and which unit: a numbered cabinet, the cellar, or a named cold room
- When the alarm started, and the temperature on the display now
- Whether the fans are running, whether the power has been off, and any water on the floor
- What the product is, and whether any of it has been moved
- Who will meet the engineer, and how they get in if the building is shut
Call 01429 836 161. Say what is at risk and where the building is, and give the number of the person standing there. If the plant is on an EJM service and maintenance contract, say so. Joblogic helps when the site is named the way the register names it.
When the temperature comes back
Write down when the cabinet or room recovered. Keep isolated product separate until the person responsible for food safety has decided. Do not throw it away to tidy up before that, and do not put it back on sale because the display has returned to a normal figure.
Then ask why it failed, with December’s deliveries still to come. A blocked grille, a tripped socket, a condenser full of wet leaves or a door that will not shut is a repair or a habit. The same cabinet alarming every Saturday belongs on the next commercial refrigeration visit. If a shop, a cellar and a cold room are all adrift, say so in one call, and say which is urgent.
Leave the first hour on one page
Sites that cope have this on a sheet by the controller. Who to call, where the keys are, which product must not be sold if the unit is warm, and which switches nobody touches. Change the sheet when the staff change.
To have that written around the plant you actually have, use the contact page and ask for a maintenance visit or a free initial site survey. Name the town, and say whether the worry is a cabinet, a cellar or a cold room.
To discuss a survey, a maintenance visit or a new installation, contact EJM Refrigeration on 01429 836 161 or email contact@ejmrefrigeration.co.uk.